Specialist advice
Call the phone number:
+7 (343) 204-93-93
or fill in the feedback form:
- Four models available, with single-pass roof bolt lengths ranging from 1.9 to 3.4 meters
- Suitable for wet or dry drilling
- Increased feed thrust for faster drilling in large holes or difficult roof conditions
- Integrated auto-cycle
- Two-speed control
- Chrome cylinder feed mechanism eliminates wear
OVERVIEW
The AFX roofbolter, designed to be a key component in automated roofbolting systems, is a heavy-duty, low-maintenance drill feed with increased feed thrust for faster drilling in large holes or difficult roof conditions. Four models are available with a full range of retracted and extended lengths to meet virtually all roofbolting needs.
Designed for reliability
- Hardened, corrosion-resistant slide tube rod structure
- Sealed, automatically lubricated skid blocks to eliminate wear to the hardened chrome slide bars
SPECIFICATIONS
| 190 | 210 | 280 | 310 | |
| Retracted length | 1,533 mm | 1,645 mm | 1,900 mm | 2,145 mm |
| Extended length | 2,425 mm | 2,445 mm | 3,338 mm | 3,645 mm |
| Chain travel | 1,042 mm | 1,152 mm | 1,500 mm | 1,650 mm |
| Total travel | 1,934 mm | 2,152 mm | 2,848 mm | 3,150 mm |
| Approximate mass | 585 kg | 655 kg | 720 kg | 790 kg |
TECHNOLOGY
Integrated control module
The integrated control module (ICM 2 or ICM3) controls all drilling and positioning functions and includes the following features:
- Auto-cycle
- Two-speed control
- Auto-feed / auto-retract
- Increased safety with two-handed operation during bolting operations
- Water monitoring (ICM 3 module only)
Two-speed rotation unit (TSRU)
- Two-speed motor, requiring less oil
- Wet and dry drilling options
- Slow speed for safe operator interface
- High-speed drill rig
- 240-750 rpm speed range
- 40 lt/min oil supply
- 500 Nm peak output torque