Specialist advice
+7 (343) 204-93-93
or fill in the feedback form:
- Boom coverage maximum of 5.1 m (height) by 5.77 m (wide) (16′ 9″ by 18′ 11″)
- Intelsense drilling control system
- Designed drive for lower profile and tighter turning radius
- Diesel powered for tramming and electric powered for drilling
- Jumbo hydraulics featuring variable displacement piston pumps
- Tier II and Tier III EPA & MSHA certified engine options
- Montabert percussion drifter (HC-50 standard, HC-95, HC-109 or HC-110 models available)
The Vein Runner II hydraulic jumbo drill is a single-boom hydraulic rig. Designed for drilling vertical, horizontal and angled holes in underground production or development headings. The Vein Runner II has two boom options: MTB 4500 and MTB 5500. MTB 4500 coverage of 4.8m x 5.3m (15’10” by 17”5”). MTB 5500 coverage of 5.1 m by 5.77 m (16′ 9″ by 18′ 11″). Inner turning radius’ is 3.05 m (10’0”) and the outer turning radius is 5.08 m (16’8”), respectively.
The Vein Runner II features the Intelsense drilling control system, which includes the following features:
- Collaring
- Anti-jamming
- Automatic water monitoring with feed return if low pressure is encountered
- Auto return to start position after hole completion
- Control levers for operating percussion, rotation, and feed
The Vein Runner II also includes robust drilling and carrier hydraulics that feature variable displacement piston pumps; specifically:
- Jumbo hydraulics: load-sensing, closed-circuit design for percussion, rotation, feed, and boom movements
- General hydraulics: load-sensing, closed center circuit design for optimal efficiency
- Steering hydraulics: load-sensing, closed center circuit design; stick steering with direct-acting control valve and two double-acting steer cylinders
Our ROPS/FOPS-certified, environmentally controlled operator’s cab uses advanced air filtration and a climate control system to insulate your operator from particulate matter and other harmful emissions. Noise is reduced significantly through the use of integrated insulation throughout the cab structure; in addition, vibration dampeners isolate the cab from the frame, ensuring a safe and comfortable ride.
| Weight | 10,955 kg | 24,100 lbs. |
| Maximum width | 1.42 m | 4 ft. 8 in. |
| Turning radius Inside Outside | 3.05 m 5.08 m | 10 ft. 16 ft. 8 in. |
| Turning angle | 40º | 40º |
| Boom guide rollover | 360º | 360º |
| Boom extension | 914 mm | 36 in. |
| Feed extension | 1219 mm | 48 in. |
| Boom coverage Height Width | 5.1 m 5.77 m | 16 ft. 9 in. 18 ft. 11 in. |
| Drifter | Montabert HC 50 (2) | |
| Tires | 10.00 x 20 | |
| Cable reel – type G-GC | 76.2 m | 250 ft. |
Montabert drifters
Our industry-leading Montabert drifters mean you receive the best possible drifter for your drill rig. Montabert HC series drifters have consistently, over the years, provided the lowest-per-drilled meter costs as compared to other drifters on the market.
Montabert drifters are known for:
- Longest maintenance intervals, resulting in highest availability
- Lowest maintenance costs
- Reliability
- Faster drilling speeds
- Lowest tool consumption
- Easiest to operate
- Highest penetration rates
- Lowest noise level
Montabert drifters provide maximum shock wave transmission; piston shape improvements mean that most of the shock energy goes directly to the bit, without tool fatigue. In addition, Montabert drifters excel in energy recycling; rebound energy is re-injected in the supply circuit, allowing the rebound energy to be used for the next cycle.
The HC-50 drifter is ideal for small headings and bolting application and is designed to reduce the lead length of the feed.
- Hole range: 45 to 76 mm
- Percussion output power: 13 Kw
- Blows per minute: 3750
The HC-109 drifter is ideal for production and development drilling and is designed for both underground and surface applications.
- Hole range: 45 to 102 mm
- Percussion output power: 18 Kw
- Blows per minute: 2900
The HC-110MT drifter is ideal for production and development drilling and is designed for both underground and surface applications.
- Hole range: 51 to 89 mm
- Percussion output power: 33 Kw
- Blows per minute: 4400