Specialist advice
+7 (343) 204-93-93
or fill in the feedback form:
- 34,473 kg (76,000 lbs.) operating capacity
- Integrated SR Hybrid Drive system for the lowest possible fuel consumption levels
- Integrated LINCS II monitoring and control system
- Integrated KLENZ air filtration system
- Multiple maintenance-friendly access points
- Handles floor clean-up in addition to wheel loading
- Well-suited for blending applications
- Ideal for operations with frequent equipment relocations or moves during blasting cycles
The L-1150 wheel loader, with an operating capacity of 34,473 kg (76,000 lbs.), can center load haulage trucks with payload ratings ranging from 120 to 200 tons. The most powerful and productive wheel loader in its class, the L-1150 is part of the Generation 2 wheel loader line, which is designed to:
- Include the latest safety features that meet global requirements recognized by leading mining industry safety councils
- Achieve greater operating hours due to robust structural design and modular components
- Provide ultimate fuel consumption levels due to the power regeneration capacity of the SR Hybrid Drive technology
Operating capacities, weights, and dimensions
| Standard lift | High lift | |||
| Bucket capacity* | 19.11 m3 | 25 yd3 | 17.58 m3 | 23 yd3 |
| Operating payload | 34,473 kg | 76,000 lbs. | 31,751 kg | 70,000 lbs. |
| Static tipping loads: | ||||
| Straight | 81,285 kg | 179,204 lbs. | 72,168 kg | 159,103 lbs. |
| Full 42º turn | 71,203 kg | 156,976 lbs. | 63,799 kg | 140,653 lbs. |
| Breakout force | 975 kN | 219,260 lbs. | 889 kN | 199,874 lbs. |
| Operating weight | 140,614 kg | 310,000 lbs. | 141,974 kg | 313,000 lbs. |
*Standard rock bucket based on a material density of 1780 kg/m3 (3000 lbs./yd.3)
Working ranges
| Engine | 899 kW | 1205 HP |
| Payload: | ||
| Standard | 24,373 kg | 76,000 lbs. |
| High lift | 31,751 kg | 70,000 lbs. |
| Bucket capacity | Sized to material density | |
| Truck match | 109 to 181 mt | 120 to 200 st |
Overall dimensions
| Standard lift | High lift | |||
| Tread | 3.84 m | 12 ft. 7 in. | 3.84 m | 12 ft. 7 in. |
| Width outside tires | 5.11 m | 16 ft. 9 in. | 5.11 m | 16 ft. 9 in. |
| Rock bucket without deflectors | 5.49 m | 18 ft. 0 in. | 5.49 m | 18 ft. 0 in. |
| Rock bucket with deflectors | 5.92 m | 19 ft. 5 in. | 5.92 m | 19 ft. 5 in. |
| Coal bucket | 6.40 m | 21 ft. 0 in. | 6.40 m | 21 ft. 0 in. |
| Height bucket fully raised | 10.52 m | 34 ft. 6 in. | 10.95 m | 35 ft. 11 in. |
| Hinge: pin height | 7.82 m | 25 ft. 8 in. | 8.41 m | 27 ft. 7 in. |
| Dump clearance | 5.64 m | 18 ft. 6 in. | 6.27 m | 20 ft. 7 in. |
| Reach at full lift | 2.82 m | 9 ft. 3 in. | 2.87 m | 9 ft. 5 in. |
| Digging depth | 0.13 m | 0 ft. 5 in. | 0.24 m | 0 ft. 9 in. |
| Ground clearance | 0.71 m | 2 ft. 4 in. | 0.71 m | 2 ft. 4 in. |
| Wheelbase | 6.15 m | 20 ft. 2 in. | 6.15 m | 20 ft. 2 in. |
| Overall length carry position | 15.98 m | 52 ft. 5 in. | 16.74 m | 54 ft. 11 in. |
| Overall length bucket down | 16.28 m | 53 ft. 5 in. | 16.43 m | 53 ft. 11 in. |
| Height over cab | 5.82 m | 19 ft. 1 in. | 5.82 m | 19 ft. 1 in. |
SR Hybrid Drive
Outstanding fuel efficiency – in some cases up to 45% less fuel consumption than comparably sized mechanical drive wheel loaders – is the result of our exclusive SR Hybrid Drive system.
Utilizing proven switched reluctance technology, the SR Hybrid Drive system allows power generation that is fully regenerative, resulting in very efficient wheel loader operation. During braking or retarding, electrical motors become generators and feed power back into the generator connected to the engine. The SR Hybrid Drive system allows for 100% capture and utilization of all braking energy during the loading cycle. Major components of the system include power electronics, motor/generator, control system, and gear train.
LINCS II network control system
The LINCS II network control system is designed to help operators meet the challenges of even the most demanding surface mining applications. The dash-mounted interactive touch screen displays:
- Instant, real-time feedback, with a wealth of information to adjust performance according to conditions
- Vital statistics, such as bucket height and angle, individual bucket payload, cumulative truck loads, elapsed time per loading cycle, total tons moved, available fuel, vehicle speed, coolant temp, etc.
- An easy-to-interpret graphical format that can be easily configured to meet personal preferences
In addition, LINCS II increases safety by preventing the operator from executing inappropriate commands. For example, LINCS II will prohibit lifting loads that are beyond the safe loading weight. LINCS II then explains, via the interactive screen, allowing the operator to take immediate corrective action without confusion or wasted effort.
PreVail remote health monitoring (RHM) system
The PreVail remote health monitoring (RHM) system helps reduce cost per ton/meter through life cycle management. We have a substantial and evolving knowledge base, developed from information gleaned from hundreds of machines worldwide. As a result, issues are detected and analyzed with greater speed and solutions are developed and applied with increasing efficiency.
Our performance benchmarks and best-in-class standards are constantly undergoing continuous improvements. In addition, we are investing in an expanded network of JoySmart Solutions service centers worldwide, enabling us to provide you with consistently better machine monitoring, reliability, and productivity.
The initial subscription period of one year is included free; after one year, subscription fees apply.