Specialist advice
+7 (343) 204-93-93
or fill in the feedback form:
- Nominal payload of 122.5 mt (135 st)
- Nominal dipper capacity of 65.7 to 70.3 m3 (86 to 92 yd.3)
- Ideal for three-pass loading of 327 to 363 mt (360 to 400 st) ultra-class haul trucks
- Adaptive Controls technology
- Direct-drive crowd with integral fleeting sheave to help eliminate boom jacking
- Optimized boom design for improved maintenance access
- A full suite of service products and consumables are available, including wire rope, GET, crawler shoes and more
- Mechanical upgrades, repair and rebuild services are available worldwide
The 4800XPC electric rope shovel, featuring Adaptive Controls technology, is specifically designed for three-pass loading of 327 to 363 mt (360 to 400 st) ultra-class haul trucks. The 4800XPC, when compared to the 4100XPC, offers:
- Up to 20% increase in production
- Up to 10% decrease in cost per ton
Working ranges
| Height of cut | 18.0 m | 59 ft. 0 in. |
| Radius of cut | 24.3 m | 79 ft. 9 in. |
| Maximum dump reach | 24.8 m | 81 ft. 3 in. |
| Dumping height (door open) | 9.4 m | 30 ft. 10 in. |
| Floor level radius | 16.2 m | 53 ft. 1 in. |
| Tail swing radius | 9.8 m | 32 ft. 3 in. |
| Operator eye level | 10.1 m | 33 ft. 1 in. |
Capacity
| Nominal payload* | 122.5 mt | 135 st |
| Nominal dipper capacity SAE struck SAE 2:1 | 65.7 to 70.3 m3 72.5 to 77.6 m3 | 86 to 92 yd3 92.7 to 99.1 yd3 |
| Rated suspended load | 209 mt | 230 st |
| Optimum truck size | 363 mt | 400 st |
*Payload and dipper capacity are dependent on many factors. Contact us for an analysis of your specific application.
Overall dimensions
| Width | 14.4 m | 47 ft. 1 in. |
| Length | 15.0 m | 49 ft. 4 in. |
| Height over gantry | 14.7 m | 48 ft. 3 in. |
| Width of crawler shoes | 1,930 mm 2,210 mm 2,540 mm | 76 in. 87 in. 100 in. |
| Width of crawlers (76″) | 10.5 m | 34 ft. 5 in. |
| Length of crawlers | 11.7 m | 38 ft. 6 in. |
| Ground clearance | 0.7 m | 2 ft. 2 in. |
| Height: ground to bottom of counterweight slabs | 3.2 m | 10 ft. 6 in. |
LED lighting package
Complete high efficiency LED lighting available for internal, external, and emergency lighting.
Adaptive Controls system
Our Adaptive Controls are a series of control functions that optimize shovel power usage in different phases of the dig cycle. Their purpose is to improve shovel performance while lessening the effect of operating impacts on the machine.
- Smart control and application of power
- Improves shovel productions without sacrificing life
- Reduces boom jacking
PreVail remote health management system
The PreVail remote health management (RHM) system provides timely and efficient machine health and performance data. The PreVail RHM system taps into the powerful communication, command, and control capabilities of the shovel’s electrical control system, transforming the data into valuable knowledge, including KPI (key performance indicator) dashboards, graphical analysis tools, predictive modeling, and reporting tools.
When you activate PreVail RHM on your 4800XPC shovel, you have access to:
- Increased asset performance visibility to help you determine when to intervene, minimizing corrective action costs
- Valuable risk management tools that help reduce troubleshooting time and mean time to recovery
- Key performance indicator (KPI) benchmarking that makes performance gaps more visible and allow you to set in motion corrective measures to maximize productivity
- Operating practices analysis that allows you to review and correct operators that are not following best practices for optimal productivity
The initial subscription period of one year is included free; after one year, subscription fees apply.
Track Shield collision detection and mitigation system
Developed with extensive shovel operator input, Track Shield is the only automated operator-assist technology on an electric rope shovel that detects and helps prevent a dipper from striking the crawler.
Payload dipper payload monitoring system
The P&H Payload system provides accurate, reliable payload measurements, coupled with simple system calibration, that allow your operators to optimize their loading processes.
The system provides the shovel operator the weight, in tons, of the material in the dipper. Since there is a target payload based on the haul truck’s size, this information allows the operator to load the truck – every time – to the exact target payload.